Limescale remover

• Use undiluted: For taps, tiles and toilets – where the descaler cannot be heated – leave to work for a few minutes, depending on the amount of limescale, then rinse thoroughly with clean water.
• Use diluted: In cooking pots and for descaling machines – where the acid can be heated and is therefore more effective.
• Dosage for kettles: Heat approx. 100 ml per 0.5 litre of water to approx. 60 °C, leave to work for 20 to 30 min. and rinse thoroughly.
• Dosage for coffee machines: Add 200 ml descaler and 800 ml water to the coffee machine’s water reservoir. Descale according to the machine’s instructions for use. A subsequent cycle with clean water is essential – continue until the water runs clear.
• Dosage for 4.5 kg washing machines: Add 1 litre of descaler to the 60 °C main wash cycle without laundry. Run the wash cycle and clean the fluff filter.
• Dosage for dishwashers: Add 1 litre of descaler to the main wash cycle of the longest programme (after the pre-rinse!) – with or without dishes. Run the programme to the end.
• Density: (20 °C) approx. 1.073 g / cm³ pH value: (20 °C, 5 g / l H₂O) approx. 3–4
• Store preferably between 10 and 25 °C.

Warning: Contains food-grade citric acid. Causes serious eye irritation. If medical advice is needed, have the container or label at hand. Keep out of reach of children. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. If eye irritation persists: Get medical advice/attention. Dispose of contents/container in accordance with local/national regulations.