Natural rubber hot water bottle with organic cover 2l

The natural rubber hot water bottle is filled with warm water and transfers heat to the human body. It can be used for warming applications when you generally feel cold.

• Before use, remove the hot water bottle from its cover if necessary and check the bottle and stopper for wear and damage. Then place the hot water bottle back in its cover before filling it.
• Never use boiling water to fill the hot water bottle, and fill it to no more than two-thirds of its capacity. Do not overfill it, as this may cause the bottle to burst.
• Hold the hot water bottle upright by the neck when filling it and pour in the water slowly to avoid hot splashes. Do not use warm water directly from the tap, as this can significantly reduce the bottle's lifespan. Instead, we recommend heating the water in a saucepan or kettle, but do not bring it to the boil. If possible, avoid using water with a high limescale or copper content.
• Remove the air from the hot water bottle by carefully pressing it on a flat surface until water is visible at the opening. Screw the stopper on firmly enough to prevent the hot water bottle from leaking. Tightening it by hand is sufficient. Take care not to overtighten the stopper. Finally, check that the funnel is empty and the bottle is watertight by turning it upside down over a sink and gently squeezing it. Use the hot water bottle with a fabric cover wherever possible.

• Do not use abrasive cleaners, all-purpose cleaners or any other cleaning products!
• Simply wipe the hot-water bottle with a damp cloth.
• After use, empty the hot-water bottle completely and store it with the stopper removed – preferably with the opening facing downwards – in a cool, dry and dark place, protected from direct sunlight.
• Do not place anything on the hot-water bottle while it is in storage.
• Protect from contact with oil or grease.
• The cover supplied is removable and machine washable at 30 °C.
• Please follow the care symbols on the cover!